压配机_车轮装备_产品中心_山东小鸭精工机械有限公司

压配机

压配机是用于小线轮辐和轮辋的装配，将轮辐压入轮辋内，并可根据需要手动设置轮辐轮辋之间的偏距值，定位准确，为轮辐和轮辋的焊接后的跳动提供保证。整机采用四柱式结构，能够保证压配时机身保持较好的刚性，提高了轮辐与轮辋压配时的同心度。

详细描述

概述

Summary

Press-fitting machine is used for assembly of small size disc and rim. It can press disc into rim precisely and can manually adjust offset distance between disc and rim. It also can locate accurately, which can guarantee disc and rims run-out after welding. The whole equipment adopts four-pillar structure, which can guarantee the machine body to keep its rigidity during assembly and can provide their concentricity.

The press-fitting machine is composed of pre-pressing cylinder, pull rod, sliding block, base seat, main oil cylinder and necessary molds.

规格参数

Specification

设备型号	Model Number	Номер модели	YPJ-400-AH
电网电压	Power Supply	Мощность	AC 380V±10%, 3phase, 50Hz
压配力	Press-Fitting Force	Сила сжатия при сборке	320KN
压缩空气	Pressure of Compressed Air	Давление сжатого воздуха	0.4 ~ 0.6Mpa
工作台行程	Travel of Working Table	Ход рабочего стола	300mm
加工轮辋范围	Processing Range of Rim	Диапазон размеров обода	12 inches ~ 18 inches
工作台面积	Working Table Size	Размер рабочего стола	900mm x 900mm